84V 8A Smart Rapid Charging Lithium Battery Charger For 20Series 72V Li-ion With Fan Charger Band Display With 3P GX16 Connector

84V 8A Smart Rapid Charging Lithium Battery Charger For 20Series 72V Li-ion With Fan Charger Band Display With 3P GX16 Connector

Specifications:

– Brand Name: TANGSPOWER

– 100% Brand New and high quality Super strong protection.

– lnput:100-240V~,7.5A(Max),50/60Hz

– Output: 84V 8A

– Security protection: OVP/OCP/ Overload protection/ Short-circuit protection

– Color: Black

– Power Max: 672W

– Connector: 3P GX16

(Please select the connector you need, if you don’t know the size or need other connectors, please contact Tangspower customer service, thank you.)

– Plug: EU / US / UK / AU

-Caution:Charge only Li ion rechargeable battery pack.Other types of batteries may burst causing

Product Features
1.100-240VAC full voltage input range,high power factor,PF>0.99.

2.Efficient LLC+synchronous rectification scheme,with the highest AC-DC conversion efficiency>94.5%.

3.Input under-voltage/output over-voltage/output over-current/output short-circuit/battery reverse protection/bad battery activation/output backflow prevention/full shutdown/over-temperature protection.

4.The LCD screen displays the charging status,can display the curent charging voltage/current/power/charging capacity,and can set the charging current.

Using Steps

1.Because this charger has a full shutdown/external battery detection function,so in the case of no load output, using a multimeter to detect the voltage of the charging port is not correct,please know!

2.Insert the power cord matched with the charger into the charger,and then insert the power cord into the mains power supply.The LCD screen of the charger displays 2S in full,and the fan rotates for 5s to enter the standby display (the blue dynamic circle flashes).

3.The charging current defaults to the maximum value (the specific current value corresponds to the technical parameter table).If you need to adjust the charging current,long press the M key to enter the setting mode. The screen displays from top to bottom:P1,curr,xxA,xx represent the value to be set,01=1A.Short press the M key to adjust the current value,long press the M key again to complete the setting and automatically exit the setting mode.If you enter the setting mode and do not operate or do not press the M key for a long time to exit,it will automatically exit after 10s,and the setting is invalid.Charge at the default value.

4.Check whether the type,specification and parameters of the battery to be charged match the charger.After confirming the matching,insert the charger output terminal into the charger.At this time,the charger LCD screen will display the charging status.

5.After the battery is fully charged,the LCD screen will display 100%and the charging capacity

Using Environment
Place the charger on a flat surface.

The location of the chargershall meet the following standards:

-Keep the ambient temperature within -10°C~45°C.

-Keep dry and away from moisture or water.

-Maintain ventilation and do not place objects around or on the charger.

-Keep it cool,do not expose it to direct sunlight,and do not place the charger near any heat generating devices.

-Keep away from all flammable materials.